New Powerbox Pioneer 14ch HV

Moderator: Dave Wilshere

New Powerbox Pioneer 14ch HV

Postby Dave Wilshere on Fri Apr 10, 2020 9:27 am

14 channels
High-performance battery backer with high continuous load capacity
Duplicated circuitry for the entire power electronics
Redundant electronic switch
All features can be controlled using PowerBox and Jeti transmitters.
All systems can be operated using BlueCom or PowerBox USB
Integrated iGyro technology of the latest type, with iGyro Sat as gyro sensor
Nine independent gyro outputs for: 3x aileron, 3x elevator, 3x rudder

Technical Data

Operating voltage 4.0V - 9.0V
Power supply 2S LiPo/LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 99mA
Current drain Standby 20µA
Maximum load current Continuous 2x10A ( <30s 2x20A )
Drop-out voltage 0.3V
Output voltage unregulated
Signal input serial


The PowerBox Pioneer is the latest development of a 14-channel power supply unit without voltage regulation, designed for HV servos. Since the unit has no voltage regulators, nor the large heat-sink surfaces required for them, it offers ultra-compact dimensions. Even so, the Pioneer still provides redundancy, as is the standard for all power supply units made by PowerBox-Systems. The output section and the switch controller are duplicated in order to guarantee maximum security.
A feature which makes the Pioneer unique in its class is its integral iGyro technology, which requires only the optional iGyro Sat as sensor unit. When plugged in, the sensor transforms the power supply unit into a high-performance 9-axis gyro of the latest generation. The integrated iGyro is ultra-simple to use, and can be set up in just a few minutes, ready for the initial trimming flight. The Pioneer offers any number of facilities for fine-tuning, making it suitable for complex models and perfectionists. Stick priority, lock-in feel and gyro characteristics can be adjusted separately for each axis and for two ranges, to name just the most important of them.
The whole package is rounded off by convenience and ease of operation, as PowerBox and Jeti pilots can set up and control all aspects of the Pioneer from the transmitter! Optionally - and for Futaba pilots - the Pioneer can be set up using the BlueCom adapter and the smartphone app, or using a PC in conjunction with the USB interface.
In performance terms the compact Pioneer concedes nothing to the larger backers. Many series of tests have been carried out with a 40A load for several minutes, and we guarantee a continuous current capacity of 20A. The elegant aluminium heat-sink ensures the necessary heat dissipation, and even the external switch is supplied in a top-quality anodised aluminium case, machined from solid.
"Do or Do not. There is no try" -Yoda
Dave Wilshere
HA Sponsor
HA Sponsor
 
Posts: 3955
Joined: Sun Nov 30, 2008 1:49 pm

Return to Motors & Rotors

Who is online

Users browsing this forum: No registered users and 5 guests