Airpower GSF-150 Failsafe

Trade Announcements
If you require a Trade Forum Section within HighAlpha please contact Joe in the 1st instance via email joe@highalpha.org
Advertising is set at £52.00 for the year.

Airpower GSF-150 Failsafe

Postby ModellbauUK on Wed Sep 18, 2013 8:22 pm

Anyone had experience using this pneumatic retract failsafe designed to drop the undercarriage on Air Up Air Down systems if the air pressure drops below a preset safety level
Attachments
GSF001.jpg
http://www.modellbauuk.com
Hampshire based shop, walk in or internet
Pretty much everything Radio Controlled
User avatar
ModellbauUK
Pilot
Pilot
 
Posts: 62
Joined: Sun Jun 30, 2013 3:09 pm
Location: Hampshire

Re: Airpower GSF-150 Failsafe

Postby Can't fly on Thu Sep 19, 2013 3:06 pm

Not used on my self but then I have never had a problem. As I'm sure you know a good system pressure tested over night should be good enough for a 7 min flight. It's a good idea but maybe another thing that could go wrong?.
New toy on the way !
User avatar
Can't fly
Moderator
Moderator
 
Posts: 4272
Joined: Sat Nov 15, 2008 8:58 pm
Location: Gatwick. I have my own airport so bog off

Re: Airpower GSF-150 Failsafe

Postby Steve h on Thu Sep 19, 2013 3:58 pm

Can't fly wrote:Not used on my self but then I have never had a problem. As I'm sure you know a good system pressure tested over night should be good enough for a 7 min flight. It's a good idea but maybe another thing that could go wrong?.



And that's why your a floor fitter and not a salesman! :-D
User avatar
Steve h
Commander
Commander
 
Posts: 1131
Joined: Wed Feb 04, 2009 11:58 am

Re: Airpower GSF-150 Failsafe

Postby Can't fly on Thu Sep 19, 2013 5:47 pm

And that is why this is now locked as you will need to have a traders section. ;) .
I'm sure some one will e in contact soon.
New toy on the way !
User avatar
Can't fly
Moderator
Moderator
 
Posts: 4272
Joined: Sat Nov 15, 2008 8:58 pm
Location: Gatwick. I have my own airport so bog off


Return to Trade Announcements

Who is online

Users browsing this forum: No registered users and 1 guest